CASP models can interface with multimedia devices such as cameras, microphones and speakers. This example, demonstrates a model that interfaces with various cameras such as USB camera, IP camera and ESP32 camera.
Pre-Requisites
- USB camera, IP camera or ESP32 camera module.
- CASP software is installed.
- The project files are located at CASP installed directory ‘CASP/support/examples/multimedia/01_camera’. These are also available for download at this link.
Description
A USB camera, an IP camera and an ESP32 CAM that are properly pre-configured are connected to the host PC through respective interfaces as shown in the below figure. A model is developed to communicate with these three cameras one at a time. The model displays three different views. One is directly from the camera; second is after the edge detector block and third is after the blur filter. User can experiment on these blocks to get the required output. Please go through the individual block parameters used in the model along with respective documentation for better understanding.
CASP Model
Procedure
- Run CASP and open the project ‘CASP/support/examples/multimedia/01_camera/01_camera.prj’ from CASP installed directory.
- In the model, enable only one camera block as per your setup. Setup camera IP and other settings as relevant.
- Click Run button to build and start simulation.
